Content

Alloy wheel | Understanding and definition of Alloy wheel | Latest Models of Alloy wheel

Alloy wheels are automobile (car, motorcycle and truck) wheels which are made from an alloy of aluminium or magnesium (or sometimes a mixture of both). They are typically lighter for the same strength and provide better heat conduction and improved cosmetic appearance.

Lighter wheels can improve handling by reducing unsprung mass, allowing suspension to follow the terrain more closely and thus improve grip, however not all alloy wheels are lighter than their steel equivalents. Reduction in overall vehicle mass can also help to reduce fuel consumption.

Better heat conduction can help dissipate heat from the brakes, which improves braking performance in more demanding driving conditions and reduces the chance of brake failure due to overheating.

Alloy wheels are also purchased for cosmetic purposes although the alloys used are not corrosion-resistant. Alloys allow the use of attractive bare-metal finishes, but these require to be sealed with paint or wheel covers. Even if so protected the wheels in use will eventually start to corrode after 3 to 5 years but refurbishment is now widely available at a cost. The manufacturing processes also allow intricate, bold designs. In contrast, steel wheels are usually pressed from sheet metal, and then welded together (often leaving unsightly bumps) and must be painted to avoid corrosion and/or hidden with wheel covers / hub caps.

Alloy wheels are prone to galvanic corrosion if appropriate preventive measures are not taken, which can in turn cause the tires to leak air. Also, alloy wheels are more difficult to repair than steel wheels when bent, but their higher price usually makes repairs cheaper than replacement.

Alloy wheels are more expensive to produce than standard steel wheels, and thus are often not included as standard equipment, instead being marketed as optional add-ons or as part of a more expensive trim package. However, alloy wheels have become considerably more common since 2000, now being offered on economy and subcompact cars, compared to a decade earlier where alloy wheels were often not factory options on inexpensive vehicles. Alloy wheels have long been included as standard equipment on higher-priced luxury or sports cars, with larger-sized or "exclusive" alloy wheels being options. The high cost of alloy wheels makes them attractive to thieves; to counter this, automakers and dealers often use locking wheel nuts which require a special key to remove.

Most alloy wheels are manufactured using casting, but some are forged. Forged wheels are usually lighter, stronger, but much more expensive than cast wheels.

A sizeable selection of alloy wheels are available to automobile owners who want lighter, more visually appealing, rarer, and/or larger wheels on their cars. Many people may think that large wheels automatically result in increased performance, handling and suspension, yet Car and Driver performed a test of different sized wheels from 15" to 19" all outfitted with the same make and model of tires and showed that both 0-60 times and fuel economy were reduced with larger wheels. They also noted that ride comfort and noise were negatively affected by the larger wheels. The larger aftermarket wheels and the corresponding tires have considerably higher cost and weight, for little benefit in return. The allure of larger wheels is that they signify luxury, sportiness, or wealth. These wheels have become a part of pop culture (as with "dubs").

The many aftermarket wheel brands include Predator Racing Wheels, Advanti Racing Wheels, Autec Alloy Wheels, Borbet Alloy Wheels, Ronal Alloy Wheels, PDW Wheels, TSW Alloy Wheels, MAK Wheels, BMF Wheels, Eurotech Wheels, Zforce, Akuza, Incubus, Viscera, Cattivo, Ballistic, Menzari, Devino, Eta Beta Wheels, Antera, Marchesini, Sparco, Speedline, TeamDynamics, NAD Wheels, R2 Wheels, Lowenhart, Rial, Orobica Line, M.B Italia, Kormetal, Toora, G.M.P Italia, Vellano, MOZ, Watanabe, SSR Wheels, Wolfhart, Wolfrace, Panther Wheel, American Racing Wheels, UsaRim, Motegi Racing Performance Wheels, Weld Racing, BBS Wheels, CMS, 5Zigen, Volk Racing, Konig Wheels, Fast Wheels and Rimstock. Most aftermarket wheels are cast, while only a few above are forged, such as Vellano, and Weld. Many companies have been formed over the years (some recently) due to the increasing demand from street racing enthusiasts and the rising demand for larger diameter wheels. MHT wheel markets a brand under the name DUB that offers a Spinner wheel, the center of the wheel continues spinning after the vehicle comes to a stop, and the Floater, the center of the wheel stays stationary during movement giving the look that the vehicle isn't moving.

Cast aftermarket wheels have also been oversaturated due to the vast influx of inexpensive chrome wheels from China. India, through Synergies Castings Ltd. and other companies, of late have also emerged as a major supplier of alloy/chrome wheels. They manufacture products to global scale due to primarily cheap but highly skilled and qualified labour.

American Racing, which owns Motegi Racing and Weld Racing among other brands such as TIS, TIS Modular, is the oldest aftermarket wheel company dating back to 1956. The oldest British company is Wolfrace who was the first company to offer a polished alloy wheel in Europe and to achieve TUV approval. Wolfrace also provided the wheels for thrust SSC and the UK's land speed record bid. A recent trend in the industry includes joint venture partnerships being formed between offshore manufacturers and local importers/distributors such as PDW Wheels which started in Australia in 2006, amongst a few others. Most wheel brands are ultimately sold through dealers such as RhinoTuning.

Some "aftermarket" are/were also available as Original equipment manufacturer (OEM) fitments, with BBS being a notable original equipment supplier to Volkswagen.

Some manufacturers also share patterns and castings, with an example (motorcycle) being the licencing of Marchesini 5-spoke design to Brembo, for the production of alloy (non-magnesium) wheels for Ducati road bikes.

Magnesium alloy wheels, or "mag wheels", are sometimes used on racing cars, in place of heavier steel or aluminium wheels, for better performance. The wheels are produced by one-step hot forging from a magnesium alloy known as ZK60, AZ31 or AZ91 (MA14 in Russia). Cast magnesium disks are used in motorcycle wheels.

The mass of a typical magnesium automotive wheel is about 5–9 kg (depending on size).

Magnesium wheels are flammable and have been banned in some forms of motorsport in the UK following fires which are very difficult to extinguish. Mag wheels have been known to catch fire in competition use after a punctured tyre has allowed prolonged scraping of the wheel on the road surface. Some variants of magnesium alloy wheels may have low corrosion resistance.

They have the disadvantages of being expensive and not practical for most road vehicles. Aluminium wheels are often mistakenly called "mag wheels".

0 comments:

Post a Comment

Blog Archive